PocketWizard MiniTT1 - Nikon Transmitter (433MHz) (113144)
- On-Camera Hot Shoe
- E-TTL & E-TTL II Compatible
- 52 Channels Over 26 Frequencies
- High Speed Sync up to 1/8000th Sec.
- Triggers all PocketWizards
- USB Upgradeable
The PocketWizard MiniTT1 - Nikon Transmitter (433MHz) utilizes PocketWizard's new ControlTL firmware platform, is part of an ultra-versatile radio slave system, and is dedicated specifically to the Canon E-TTL II flash control system. It simply slides directly into the camera's hot shoe. There are no special settings to make or modes to call up. Use the camera, on-camera flash, or flash commander controls for flash compensation, zone and ratio control. It supports single or multiple dedicated flash units. The MiniTT1 is the ideal addition to any Canon E-TTL II flash system. It works in combination with the FlexTT5 Transceiver, and since this system works on digital radio technology, it can support E-TTL around corners, out-of-sight, or in bright sunlight.
2 Channel Settings + Learn Mode
Each setting can also be programmed to transmit any of 20 ControlTL channels for TTL photography and 32 standard channels for manual flash photography. The FlexTT5 Transceiver also has a three-zone selector switch, Out of the box, the MiniTT1 is programmed for PocketWizard channels 1 and 2.
HyperSync & High-Speed Sync Technology
Enables X-sync speeds of up to 1/8000 with full-power flash. High-Speed Sync provides auto flash with the camera's shutter speed setting, up to 1/8000th. Unique programming optimizes HSS for better operation and more shots per set of batteries.
HyperSync & High-Speed Sync Technology
Supports flash sync speeds of up to 1/500th sec. High-Speed Sync auto syncs flash system with the camera's shutter speed setting, up to 1/8000th.
Built-in Hot Shoe, use with any flash
Features a hot shoe on the top, so that you can still mount a flash unit directly onto the camera. This allows you to combine your remote flash with the on-camera flash, or use the on-camera flash for additional E-TTL II control only. Hot shoe contacts automatically detect dedicated E-TTL or simple hot shoe flash.
Reverse Compatible & Basic Triggering
Operates on the same channels as all other PocketWizards to work with any unit you may already have. Basic Triggering mode enables standard use with virtually any hot-shoe camera.
Low-Profile Design
The MiniTT1 lies flat to stay out of the way and uses an internal antenna.
Configurable and Upgradeable
The MiniTT1 features a mini-USB port, which makes it upgradeable and "future-proof" for continuous improvements and compatibility upgrades. PocketWizard Utility software, available on www.pocketwizard.com enables setting custom functions, adjusting HyperSync timing and setting channels.
- MPN - 45.1.PW-MINI-N-CE
- GTIN - 893577001538
Specification
| Compatibility: | Nikon i-TTL |
| Mounting: | Hot Shoe |
| Status Indicator: | LED: Green, Amber, Red status indications |
| Power: | 3 V Lithium battery, CR2450 (included) or CR2354 Lithium coiin cell type |
| Channels: | 52 Channels over 26 Frequencies (FCC/IC) 35 Channels over 5 Frequencies (CE) |
| Wireless Range: | Up to 10 to 240 meters (30 to 800 feet) for E-TTL triggering. Up to 10 to 365 meters (30 to 1200 feet) for basic triggering. Range is dependent on multiple factors including equipment, mode, environment, positioning, orientation and interference. |
| Radio Frequency: | 340.00 - 354.00 MHz US FCC / IC (North America) 433.42 - 434.42 MHz CE (EU/Asia/Other) |
| Operating Temperature: | Above -15° C (5° F) and below 50° C (120° F) |
| Storage Temperature: | Above -30 C (-22 F) and below 85 C (185 F) |
| Dimensions: | 2.8" (7.1 cm) long x 1.9" (4.9 cm) wide x 1.3" (3.3 cm) tall |
| Weight: | 65 grams |
- PocketWizard MiniTT1 - Nikon Transmitter (433MHz)
- USB Mini Cable
- CR-2450 Lithium Battery
Review
