Nissin Air-1 Commander Receiver - Canon (127870)
- Nissin Air 2.4 GHz Radio TTL System
- For Use with Air 1 Commander
- Compatible with Canon E-TTL / E-TTL II
- Wireless Slave TTL Functionality
- Triggering Range: 98'
- Eight Channels & Three Groups (A, B, C)
- Flash Sync Speed up to 1/8000 Second
- Hot Shoe & PC Sync Terminal
- Foot with 1/4"-20 Thread; Flip-Out Stand
- Runs on 2 AAA Batteries
Bring all of your Canon TTL flashes into the Nissin Air System with 2.4 GHz radio transmission by mounting them to the Air R Receiver. Using an Air 1 Commander for the Canon E-TTL / E-TTL II system and the Air R Receiver, photographers can now set up and control numerous flashes in an off-camera setup at distances up to 98'. The receivers add wireless slave TTL functionality with support for high-speed sync up to 1/8000 second, manual power control, and manual zoom, with the ability to select between 8 channels and organize 3 groups.
Connecting to a TTL flash is simple as the receiver has a hot shoe on the top for communication. For strobes and manual flashes, the Air R also has a PC sync terminal for basic connections. Mounting the receiver is simple as well with a cold foot on the bottom with a 1/4"-20 thread for stands. There is also a flip-out stand for placing directly on a flat surface. Additionally, it runs on 2 AAA batteries.
- MPN - FGDAIRRC#
- GTIN - N/A
No available accessories for this Product
Specification
Power: | Settings: 1/1 to 1/128 |
Channels: | 8 |
Groups: | 3 |
Wireless Range: | 30 m |
Radio Frequency: | 2.4 GHz |
Control Modes: | Manual, TTL |
Flash Interval: | 10 Flashes per Sec |
Sync Speed: | 1/8000 Sec |
Bottom Mount: | Cold Foot with 1/4"-20 Thread |
Dimensions: | 65 x 60 x 50 mm (Receiver) |
Weight: | 53.9 g |
Port: | 1 x PC Sync |
Top Mount: | Hot Shoe |
Battery: | 2 x AAA |
EV Range: | ±2 (1/2 Increments) |
Nissin Air-1 Commander Receiver - Canon